{"title":"Insulation under electric underfloor heating","description":"\u003cp\u003eUnderfloor heating is a very pleasant type of heating that distributes heat well throughout the room. However, you need to make sure that not too much heat is lost and that the cables are well protected. This is important both for the environment and for your own wallet, because you naturally don't want to pay for heat you don't notice. That's why it's useful to insulate the heating cables in your floor. You can do this, for example, with an insulation roll, where you cover and seal the cables from underneath. This ensures optimal use of your underfloor heating. It also reduces the likelihood of damage to the cables, so you don't have to worry about potential repairs. See our site for all the ways and products to properly insulate your underfloor heating.\u003c\/p\u003e","products":[{"product_id":"xps-insulation-board-iso74-parquet-wood-carpet-isofoam","title":"Heating Mat XPS Insulation Board 3mm ISO74","description":"\u003cp\u003e3mm insulation developed for underfloor heating mat installation. Provides faster heating time with minimal build height. The ISO74 features very high density construction, composed of small closed cells that offer excellent performance under heating mats. The ISO-74 structure ensures that heat is not directed downward, directing all heat toward the floor surface instead.\u003c\/p\u003e\n\u003cdiv\u003e5m² 10 panels of 100 x 50 cm x 3 mm\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Information on ISO74 Polystyrene Insulation Boards\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent thermal insulation\u003c\/li\u003e\n\u003cli\u003eVery good noise reduction\u003c\/li\u003e\n\u003cli\u003eLightweight, only 3 mm\u003c\/li\u003e\n\u003cli\u003eEasy to install and cut\u003c\/li\u003e\n\u003cli\u003eSuitable for all underfloor heating film systems\u003c\/li\u003e\n\u003cli\u003eWater resistance 0.06%\u003c\/li\u003e\n\u003cli\u003eTemperature resistant from -30 to + 70 °C\u003c\/li\u003e\n\u003cli\u003eAcoustic insulation Upper floor -5.6 dB Lower floor -21 dB\u003c\/li\u003e\n\u003cli\u003eCompression resistance 6 t\/m²\u003c\/li\u003e\n\u003cli\u003eInsulation value 0.0279 W\/mK\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Quality Heating","offers":[{"title":"5m2 pak","offer_id":57153552089432,"sku":"8594167800327","price":24.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/2490\/0440\/files\/karpet-verwarming-isolatie_966094d5-f34b-4c31-bb71-a0531be47060.jpg?v=1776753064"},{"product_id":"xps-insulation-board-iso74-for-parquet-wood-and-carpet-isofoa","title":"XPS Insulation Board ISO74 (wood, parquet, carpet) Isofoam","description":"\u003cp\u003eISO74 insulation board by Quality Heating, only 6 millimeters thick, suitable for underfloor heating insulation. The ISO74 has very high density and is composed of small closed cells that provide excellent performance under underfloor heating film. The ISO-74 structure ensures that heat is not conducted downward, directing all heat toward the floor surface.\u003c\/p\u003e\n\u003cdiv class=\"product-omschrijving\"\u003e\u003clabel for=\"catalogProduct644\"\u003e5m² 10 sheets of 100 x 50 cm x 6 mm\u003c\/label\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Information ISO-74 Polystyrene Insulation Boards\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent thermal insulation\u003c\/li\u003e\n\u003cli\u003eVery good noise reduction\u003c\/li\u003e\n\u003cli\u003eLightweight, only 6 mm\u003c\/li\u003e\n\u003cli\u003eEasy to install and cut\u003c\/li\u003e\n\u003cli\u003eSuitable for all underfloor heating film systems\u003c\/li\u003e\n\u003cli\u003eWater resistance 0.06\u003c\/li\u003e\n\u003cli\u003eTemperature resistant from -30 to + 70 °C\u003c\/li\u003e\n\u003cli\u003eAcoustic insulation Upper floor -5.6 dB Lower floor -21 dB\u003c\/li\u003e\n\u003cli\u003eCompression resistance 6 t \/ m²\u003c\/li\u003e\n\u003cli\u003eInsulation value 0.0279 W\/mK\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Quality Heating","offers":[{"title":"Default Title","offer_id":56891528905048,"sku":"Isolatie XPS plaat ISO74 (hout,parket, tapijt) Isofoam","price":24.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/2490\/0440\/files\/isolatie-xps-plaat-iso74-houtparket-tapijt-isofoam.jpg?v=1773332934"},{"product_id":"warmup-4-in-1-ultralight-insulation","title":"WarmUp 4in1 Ultralight insulation","description":"\u003cp\u003e\u003cb\u003e\u003cstrong\u003eWarmUp insulation 4in1 ultralight\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe WarmUp 4in1 Ultralight insulation boards are ideal to use in combination with electric underfloor heating. They can be installed under all types of subfloors, and they are dust-free and lighter than other insulation boards, making them easier to work with\u003c\/p\u003e\n\u003cp\u003eWarmUp Ultralight insulation can be easily and dust-free cut to size because it has no cement coating. \u003cbr\u003eThe WarmUp Ultralight has been tested and assessed for its acoustic performance by Intertek Building \u0026amp;\u003cbr\u003eConstruction in accordance with ISO 10140-2, ISO 10140-3, ASTM E90 and ASTM E492. The obtained results are tested values and were obtained by using the prescribed test methods in test chambers that comply with the laboratory requirements specified in ISO 10140-5.\u003c\/p\u003e\n\u003cp\u003eThe warranty is 10 years.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cstrong\u003eStep 1\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\nThe substrate must be clean and dry and, if necessary, leveled with a smoothing compound to obtain an even surface.\u003cbr\u003eNOTE: The maximum allowable deviation of a straight edge of 2 m, which rests on the subfloor under its own weight, is 3 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cstrong\u003eStep 2\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\nPrime subfloors with a diluted (1:4) primer.\u003cbr\u003eConsult the manufacturer's instructions for specially manufactured subfloors.\u003cbr\u003eIf the subfloor is well prepared and clean, priming may not be necessary; this can vary depending on the chosen tile adhesive. Consult the tile adhesive manufacturer's instructions for information on priming.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cstrong\u003eStep 3\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\nUltralight must be applied with a flexible cement-based adhesive. The adhesive should be combed out and notched with a 6 mm x 6 mm (¼” x ¼”) square notched trowel to obtain a ribbed bed, with slight depressions in the subfloor filled by the mortar.\u003cbr\u003eNOTE: If you intend to apply a smoothing compound over Ultralight, apply WarmUp edge strip up to the edge of the room to allow for differences in movement between the finished floor level and the walls.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cstrong\u003eStep 4\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\nUltralight must be laid onto the freshly applied ribbed bed and embedded thoroughly to ensure that no voids remain under the boards and that they are firmly supported.\u003cbr\u003eAll boards must be laid staggered.\u003cbr\u003eNOTE: Allow the adhesive used to fix the boards to the subfloor to cure before laying the electric underfloor heating directly on the boards.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Warmup","offers":[{"title":"Standaard","offer_id":57153539506520,"sku":"5034526015335","price":19.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/2490\/0440\/files\/warmup-isolatie.jpg?v=1776752922"},{"product_id":"iso-84-infrared-reflective-radiant-floor-insulation","title":"XPE-PRO ISO-84 7mm - 7.2 m² insulation with reflective layer","description":"\u003cp\u003e\u003cb\u003e\u003cstrong\u003eNote\u003c\/strong\u003e\u003c\/b\u003e; the reflective side of the insulation must not come into contact with the heating foil. \u003c\/p\u003e\u003cp\u003eXPE-PRO reflective insulation with a high insulating value available in 7mm thickness developed for under floor-heating foil systems. The ISO-84 has a very high density and is composed of small closed cells that deliver excellent performance under floor-heating foil. The structure of the ISO-84 ensures that no heat is conducted downward, thereby directing all heat toward the floor surface. Supplied per pack of 7.2 m². \u003c\/p\u003e\u003cp\u003eFor vapor sealing of the QH XPE PRO we always recommend purchasing the \u003ca href=\"https:\/\/www.gaslooswonen.nl\/ducktape.html\"\u003eheat-resistant tape\u003c\/a\u003e, because it adheres well to the blue side of the insulation.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eCompressive strength\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eFor laminate constructed with click joints the following applies: the \"European Producers of Laminate Flooring (EPLF)\" states that the underlayment for this type of flooring must not deform excessively. The recommended value is at least 10 kPa at 0.5 mm deformation. The QH ISO-84 underlayment shows 55 kPa at a deformation of 0.7 mm. This underlayment therefore meets the minimum requirement for compressive strength.\u003c\/p\u003e\u003cp\u003eThis value was measured under normal household use. This also covers placing larger or heavy pieces of furniture (such as sofas) on the relevant floor. To be sure, check with the manufacturer of your floor whether the intended load on the floor is compatible with the combination with this underlayment.\u003c\/p\u003e\u003cp\u003eThe above applies only to laminate click systems. For other types of flooring such as vinyl or PVC, other requirements regarding the compressive strength of the underlayment may apply. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eSize\u003c\/p\u003e\u003cp\u003emm\u003c\/p\u003e\u003cp\u003e1200*600*7\u003c\/p\u003e\u003cp\u003eDensity of core board\u003c\/p\u003e\u003cp\u003eKg\/m3\u003c\/p\u003e\u003cp\u003e33~35\u003c\/p\u003e\u003cp\u003eThermal conductivity, 90 days, 10°C\u003c\/p\u003e\u003cp\u003eW\/mK\u003c\/p\u003e\u003cp\u003e0.028~0.032\u003c\/p\u003e\u003cp\u003eCompressive strength at 10% deflection or yield (vertical)\u003c\/p\u003e\u003cp\u003ekPa\u003c\/p\u003e\u003cp\u003e250~350\u003c\/p\u003e\u003cp\u003eTensile strength\u003c\/p\u003e\u003cp\u003ekPa\u003c\/p\u003e\u003cp\u003e250~350\u003c\/p\u003e\u003cp\u003eWater absorption\u003c\/p\u003e\u003cp\u003eVol-%\u003c\/p\u003e\u003cp\u003e\u0026lt;=1.00%\u003c\/p\u003e\u003cp\u003eCoefficient of linear thermal expansion\u003c\/p\u003e\u003cp\u003emm\/mK\u003c\/p\u003e\u003cp\u003e0.07\u003c\/p\u003e\u003cp\u003eTemperature limits\u003c\/p\u003e\u003cp\u003e°C\u003c\/p\u003e\u003cp\u003e-50°C, +80°C\u003c\/p\u003e\u003cp\u003eInsulation RC\u003c\/p\u003e\u003cp\u003eISO9001\u003c\/p\u003e\u003cp\u003e1.6 RC\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Quality Heating","offers":[{"title":"7mm - 7,2m2","offer_id":57154356183384,"sku":"8720813382378","price":44.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/2490\/0440\/files\/xps-pro-7mm---72m2-isolatie-met-reflectie-vloerver.jpg?v=1776766033"},{"product_id":"insulation-tile-panels-hardfoam-iso64-6-10-20-3","title":"Insulation Board (Tiles) Hardfoam ISO64 6, 10 and 20 mm","description":"\u003cp\u003e\u003cspan style=\"background-color: transparent; color: #000000; font-family: Verdana,Arial,Helvetica,sans-serif; font-size: 14px; font-style: normal; font-variant: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: left; text-decoration: none; text-indent: 0px; text-transform: none; -webkit-text-stroke-width: 0px; white-space: normal; word-spacing: 0px;\"\u003eFor example, for a 3m2 bathroom \/ 0.72m2 = 4.1 insulation boards are needed = 5 pieces. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eQuality Heating's pressure-resistant ISO-64 insulation boards offer the possibility of heating the floor more quickly with 33% efficiency. Specially developed for under tile floors. Even if you have limited installation height, Quality Heating's ISO64 insulation panel offers you a solution. With the ISO64, you will increase the efficiency and response time of underfloor heating plates. These properties translate into lower energy consumption. The ISO64 rigid foam is coated on both sides with a special mortar that is processed into the panel's fiberglass structure.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003eAdditional Information ISO-64 Polystyrene Rigid Foam\u003cimg style=\"float: right;\" src=\"https:\/\/static.webshopapp.com\/shops\/037697\/files\/055028974\/meting-isolatie-boards-elektrische-vloerverwarming.gif\" width=\"300\" height=\"200\"\u003e\n\u003c\/h3\u003e\n\u003cp style=\"text-align: left;\"\u003e- Moisture and rot resistant\u003cbr style=\"font: 12px\/normal arial, verdana, sans-serif; text-align: left; color: #000000; text-transform: none; text-indent: 0px; letter-spacing: normal; word-spacing: 0px; white-space: normal; background-color: #ffffff; -webkit-text-stroke-width: 0px;\"\u003e- Fire resistant\u003cbr style=\"font: 12px\/normal arial, verdana, sans-serif; text-align: left; color: #000000; text-transform: none; text-indent: 0px; letter-spacing: normal; word-spacing: 0px; white-space: normal; background-color: #ffffff; -webkit-text-stroke-width: 0px;\"\u003e- Does not absorb moisture\u003cbr style=\"font: 12px\/normal arial, verdana, sans-serif; text-align: left; color: #000000; text-transform: none; text-indent: 0px; letter-spacing: normal; word-spacing: 0px; white-space: normal; background-color: #ffffff; -webkit-text-stroke-width: 0px;\"\u003e- Suitable for all types of underfloor heating systems\u003cbr\u003e- Modified with high-quality mortar\u003cbr\u003e- Complete fiberglass structure\u003cbr\u003e- Excellent thermal insulation\u003cbr\u003e- Very good noise reduction\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e- Water resistance: water absorption \u0026gt; 0.5% after 28 days under water, according to DIN 53 421\u003cbr\u003e- Thermal resistance -30 to + 70 °C\u003cbr style=\"font: 12px\/normal arial, verdana, sans-serif; text-align: left; color: #000000; text-transform: none; text-indent: 0px; letter-spacing: normal; word-spacing: 0px; white-space: normal; font-size-adjust: none; font-stretch: normal; background-color: #ffffff; -webkit-text-stroke-width: 0px;\"\u003e- Sound insulation Above floor -5.6 dB Below floor -21 dB\u003cbr style=\"font: 12px\/normal arial, verdana, sans-serif; text-align: left; color: #000000; text-transform: none; text-indent: 0px; letter-spacing: normal; word-spacing: 0px; white-space: normal; font-size-adjust: none; font-stretch: normal; background-color: #ffffff; -webkit-text-stroke-width: 0px;\"\u003e- Compressive strength \u0026gt; 0.20 N\/mm² according to DIN 52 615\u003cbr style=\"font: 12px\/normal arial, verdana, sans-serif; text-align: left; color: #000000; text-transform: none; text-indent: 0px; letter-spacing: normal; word-spacing: 0px; white-space: normal; font-size-adjust: none; font-stretch: normal; background-color: #ffffff; -webkit-text-stroke-width: 0px;\"\u003e- Insulation value 0.039 W\/mK according to DIN 4108\u003c\/li\u003e\n\u003cli\u003eR-value 6mm: 0.15m2 K\/W\u003c\/li\u003e\n\u003cli\u003eR-value 10 mm: 0.26 m2 K\/W\u003c\/li\u003e\n\u003cli\u003eR-value 20 mm: 0.51 m2 K\/W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation of ISO-64 Rigid Foam Panels\u003c\/h3\u003e\n\u003cp\u003eIf the board is installed on a wooden subfloor, we recommend both gluing and screwing. If the board is installed on a concrete\/cement screed, gluing alone is sufficient. Tile adhesive can be used for this purpose.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eThe ISO-64 insulation panel is available in the following dimensions: \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e1200 mm x 600 mm and a thickness of 6, 10 and 20 mm per 0.72 m2 panel. \u003c\/span\u003e\u003c\/p\u003e","brand":"Quality Heating","offers":[{"title":"10mm","offer_id":57153558937944,"sku":"8721184315156","price":14.95,"currency_code":"GBP","in_stock":true},{"title":"6mm","offer_id":57153559036248,"sku":"8720726073004","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"20mm","offer_id":57153559265624,"sku":"8721184315163","price":14.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/2490\/0440\/files\/isolatie-onder-elektrische-vloerverwarming.jpg?v=1776753202"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/2490\/0440\/collections\/xpe-pro-iso-84-7mm-72m2-isolatie-met-reflectie.jpg?v=1773305330","url":"https:\/\/www.infraredheatingstore.com\/collections\/insulation-under-electric-underfloor-heating.oembed","provider":"Infraredheatingstore.com","version":"1.0","type":"link"}